Homologated stackable containers
Our stackable containers stainless steel containers (IBC), approved ADR-RID UN 31 AY, are suitable for the transport of liquids Hazards with a specific density ranging from 1.5 kg / dm3 to 1.9 kg / dm3, with a vapour pressure of not more than 110KPa at 50 ° C, and therefore identifiable in packing groups 2 and 3. All approved stackable containers produced by our company, were subjected, to the vibration test, as required by the updating of the homologation directives.
The approved stackable containers are suitable for the transport of dangerous liquids by land, in accordance with the provisions ADR , Appendix A.6 and RID, Appendix VI, as well as by sea in accordance with the IMDG Code. They are therefore used for the transport of chemical products of various kinds and inks, inks, paints, solvents, alcohols, etc.
Our approved stackable containers can be made of stainless steel Aisi 304 or Aisi 316, with carbon steel bearing frame electrically welded hot dip galvanized by immersion, and complemented by various accessories in stainless steel, in compliance with the homologation project related to each type of container.stackable containers have capacities ranging from 500 liters to 2500 liters, per second model, and can also be thermally insulated with injected polyurethane foam and equipped with a stainless steel double layer, to allow heating or cooling of the contained product and, therefore, the temperature control.
Due to the constraint linked to the homologation project of the tanks for hazardous substances, it is not possible to add, remove or modify accessories, thickness and type of material; for the same reason, it is not possible to change size and capacity.
 |
Approved IBC The PLO range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions. Technical features and standard components Optional accessories |
|---|
| PLO 500 | PLO 750 | PLO 995 | PLO 1250 | |
| A | 980 | 1230 | 1450 | 1730 |
| B | 500 | 750 | 970 | 1250 |
| CAPACITY LT. | 565 | 794 | 997 | 1251 |
| WEIGHT Kg* | 130 | 140 | 150 | 180 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
 |
Approved Insulated IBC The PLOI range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions and need to maintain the filling temperature for approximately 24 hours. Technical features and standard components Optional accessories |
|---|
| PLO/I 650 | PLO/I 850 | PLO/I 1000 | |
| A | 1250 | 1500 | 1750 |
| B | 750 | 1000 | 1250 |
| CAPACITY LT. | 670 | 875 | 1050 |
| WEIGHT Kg* | 200 | 240 | 280 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
 |
Approved insulated IBC with Heating/Cooling System The PLO/IR range of approved IBC have been designed for the handling, the storage and the transport of all fluids that during storage should be heated or cooled: this is obtained by circulating in the special jacket a hot or cold liquid. Technical features and standard components Optional accessories |
|---|
| PLO/IR 650 | PLO/IR 850 | PLO/IR 1000 | |
| A | 1250 | 1500 | 1750 |
| B | 750 | 1000 | 1250 |
| CAPACITY LT. | 670 | 875 | 1050 |
| WEIGHT Kg* | 200 | 240 | 280 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
 |
Approved IBC The PKO range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions. Technical features and standard components Optional accessories |
|---|
| PKO 500 | PKO 750 | PKO 995 | PKO 1250 | |
| A | 1150 | 1400 | 1620 | 1900 |
| B | 500 | 750 | 970 | 1250 |
| CAPACITY LT. | 565 | 794 | 997 | 1251 |
| WEIGHT Kg* | 130 | 140 | 150 | 180 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
 |
Approved IBC The AZ-E palletized container is according to DIN regulation as laid down in section 16 UN-APP.A.6/VI ADR-RID for the transportation and storage of dangerous liquids with a density not exceeding 1.85 kg/dm3 packing groups II and III. Technical features and standard components |
|---|
| AZ-E 500 | AZ-E 1000 | |
| A | 1200 | 1200 |
| B | 1100 | 1100 |
| C | 1080 | 1640 |
| D | 1070 | 1070 |
| CAPACITY LT. | 500 | 999 |
| WEIGHT Kg* | 230 | 275 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
|
Approved IBC The PLO range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions. Technical features and standard components Optional accessories |
|---|
| PLO 500 | PLO 750 | PLO 995 | PLO 1250 | |
| A | 980 | 1230 | 1450 | 1730 |
| B | 500 | 750 | 970 | 1250 |
| CAPACITY LT. | 565 | 794 | 997 | 1251 |
| WEIGHT Kg* | 130 | 140 | 150 | 180 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
|
Approved Insulated IBC The PLOI range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions and need to maintain the filling temperature for approximately 24 hours. Technical features and standard components Optional accessories |
|---|
| PLO/I 650 | PLO/I 850 | PLO/I 1000 | |
| A | 1250 | 1500 | 1750 |
| B | 750 | 1000 | 1250 |
| CAPACITY LT. | 670 | 875 | 1050 |
| WEIGHT Kg* | 200 | 240 | 280 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
|
Approved insulated IBC with Heating/Cooling System The PLO/IR range of approved IBC have been designed for the handling, the storage and the transport of all fluids that during storage should be heated or cooled: this is obtained by circulating in the special jacket a hot or cold liquid. Technical features and standard components Optional accessories |
|---|
| PLO/IR 650 | PLO/IR 850 | PLO/IR 1000 | |
| A | 1250 | 1500 | 1750 |
| B | 750 | 1000 | 1250 |
| CAPACITY LT. | 670 | 875 | 1050 |
| WEIGHT Kg* | 200 | 240 | 280 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
|
Approved IBC The PKO range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions. Technical features and standard components Optional accessories |
|---|
| PKO 500 | PKO 750 | PKO 995 | PKO 1250 | |
| A | 1150 | 1400 | 1620 | 1900 |
| B | 500 | 750 | 970 | 1250 |
| CAPACITY LT. | 565 | 794 | 997 | 1251 |
| WEIGHT Kg* | 130 | 140 | 150 | 180 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
|
Approved IBC The AZ-E palletized container is according to DIN regulation as laid down in section 16 UN-APP.A.6/VI ADR-RID for the transportation and storage of dangerous liquids with a density not exceeding 1.85 kg/dm3 packing groups II and III. Technical features and standard components |
|---|
| AZ-E 500 | AZ-E 1000 | |
| A | 1200 | 1200 |
| B | 1100 | 1100 |
| C | 1080 | 1640 |
| D | 1070 | 1070 |
| CAPACITY LT. | 500 | 999 |
| WEIGHT Kg* | 230 | 275 |
| * Weights are indicative The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer. |
Approved IBC
The PLO range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions.
Technical features and standard components
• Stainless steel tank AISI 304 or AISI 316 cold rolled
• forged bottom with anti-stagnation drain pan
• DN 400 hatch with quick closing – system and specific product contents seal
• Discharge valve 1 ½ “- 2” – 2 ½ “- 3”
• Safety valve +0,49 bar
• Modular cage made of hot galvanized carbon steel
Optional accessories
• Ball or butterfly discharge valves
• Safety valves single or double action
• Screw or handwheel hatch closing systems
| PLO 500 | PLO 750 | PLO 995 | PLO 1250 | |
| A | 980 | 1230 | 1450 | 1730 |
| B | 500 | 750 | 970 | 1250 |
| CAPACITY LT. | 565 | 794 | 997 | 1251 |
| WEIGHT Kg* | 130 | 140 | 150 | 180 |
* Weights are indicative
The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer.
Approved Insulated IBC
The PLOI range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions and need to maintain the filling temperature for approximately 24 hours.
Technical features and standard components
• Stainless steel tank AISI 304 or AISI 316 cold rolled built in double wall with thermally insulated air cavities with polyurethane foam
• forged bottom with anti-stagnation drain pan
• DN 400 hatch with quick closing – system and specific product contents seal
• Discharge valve 1 ½ “- 2” – 2 ½ “- 3”
• Safety valve +0,49 bar
• Modular cage made of hot galvanized carbon steel
Optional accessories
• Ball or butterfly discharge valves
• Safety valves single or double action
• Screw or handwheel hatch closing systems
• Cooling/heating system
| PLO/I 650 |
PLO/I 850 |
PLO/I 1000 |
|
| A | 1250 | 1500 | 1750 |
| B | 750 | 1000 | 1250 |
| CAPACITY LT. | 670 | 875 | 1050 |
| WEIGHT Kg* | 200 | 240 | 280 |
* Weights are indicative
The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer.
IBC Omologato Isolato con Camicia di Riscaldamento / Raffreddamento Isolato
Approved insulated IBC with Heating/Cooling System
The PLO/IR range of approved IBC have been designed for the handling, the storage and the transport of all fluids that during storage should be heated or cooled: this is obtained by circulating in the special jacket a hot or cold liquid.
Technical features and standard components
• Stainless steel tank AISI 304 or AISI 316 in cold rolled built in double wall thermally insulated with polyurethane foam and a special jacket for the circulation of heating or cooling liquid
• forged bottom with anti-stagnation drain pan
• DN 400 hatch with quick closing – system and specific product contents seal
• Discharge valve 1 ½ “- 2” – 2 ½ “- 3”
• Heating/cooling systems
• Safety valve +0,49 bar
• Modular cage made of hot galvanized carbon steel
Optional accessories
• Ball or butterfly discharge valves
• Safety valves single or double action
• Screw or handwheel hatch closing systems
| PLO/IR 650 | PLO/IR 850 | PLO/IR 1000 | |
| A | 1250 | 1500 | 1750 |
| B | 750 | 1000 | 1250 |
| CAPACITY LT. | 670 | 875 | 1050 |
| WEIGHT Kg* | 200 | 240 | 280 |
* Weights are indicative
The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer.
Approved IBC
The PKO range of approved IBC is recommended for the handling, storage and transportation of all fluids with specific restrictions.
Technical features and standard components
• Stainless steel tank AISI 304 or AISI 316 cold rolled
• forged bottom with anti-stagnation drain pan and central discharge
• DN 400 hatch with quick closing – system and specific product contents seal
• Discharge valve 1 ½ “- 2” – 2 ½ “- 3”
• Safety valve set +0,49 bar
• Modular cage made of hot galvanized carbon steel
Optional accessories
• Ball or butterfly discharge valves
• Safety valves single or double action
• Screw or handwheel hatch closing systems
• Heating/cooling systems on the bottom
| PKO 500 | PKO 750 | PKO 995 | PKO 1250 | |
| A | 1150 | 1400 | 1620 | 1900 |
| B | 500 | 750 | 970 | 1250 |
| CAPACITY LT. | 565 | 749 | 997 | 1251 |
| WEIGHT Kg* | 130 | 140 | 150 | 180 |
* Weights are indicative
The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer.
Approved IBC
The AZ-E palletized container is according to DIN regulation as laid down in section 16 UN-APP.A.6/VI ADR-RID for the transportation and storage of dangerous liquids with a density not exceeding 1.85 kg/dm3 packing groups II and III.
Technical features and standard components
• Material: stainless steel IIID (finish BA) 1.4301
• DN 457 manhole with screw closing or or wing nut closing or strip lever
• Safety valve set at 0,5 bar
• PE manhole seal
• Discharge: DN 80 butterfly valve and DN 80 Camlock with cap in aluminium and fine chain (ALTERNATIVE: DN 50)
• Dismountable cage: carbon steel galvanized by hot dipping (ALTERNATIVE: welded cage)
• Anti-vibrating supplements
• Moving part leading device
AZ-E 500AZ-E 1000
| A | 1200 | 1200 |
| B | 1100 | 1100 |
| C | 1080 | 1640 |
| D | 1070 | 1070 |
| CAPACITY LT. | 500 | 999 |
| WEIGHT Kg* | 230 | 275 |
* Weights are indicative
The information contained in this sheet is subject to change, without notice, at the discretion of the manufacturer.
Approved IBC
PLO Range
PLOI Range
PLOIR Range
PKO Range
AZ-E Range